《聚合物成型加工》实践教学体系改革

从教学内容、教学方法、实验实践环节、考核方式等角度,深入分析了《聚合物成型加工》课程的教学现状,并在此基础上指出,目前单纯的理论教学与人才培养目标相悖,缺乏系统性的实验实践教学体系和多样化的课程考核方式。《聚合物成型加工》实践教学体系改革本着培养应用型人才的原则,从实际生产问题和研发前沿问题入手,由原来单纯的课堂教学模式改为课堂教学与实践环节相结合;考核也改为"书面作业+调研报告+项目答辩+实践操作+考试"的综合考核形式;并设计了系统性的创新实践环节,使学生在掌握课程所学基础知识的同时,可以独立的根据制品性能和使用要求,进行合理的聚合物成型物料配制,选择合适的成型加工方法,利用实验室及产学研实践基地的加工条件自己动手将聚合物原材料做成制品。     

弹簧摆动力学行为演示仪

在非线性保守系统中,弹簧摆结构简单,运动特性较为典型.本文通过拉格朗日方程对弹簧摆系统进行理论分析解得运动方程,并在径向和切向将运动分解,运用图像处理技术设计制作了弹簧摆演示仪和实验软件,对运动轨迹与时序图进行可视化.软件绘制的弹簧摆轨迹与理论结果具有较好的一致性.     

气泡在超声场中绕圈运动的高速摄影及其图像分析

借助高速摄影和图像分析技术对首次发现的附壁气泡的绕圈现象进行了实验研究,重点研究游移气泡的运动轨迹、附壁气泡的布阵过程、气泡的来源以及气泡的振动细节.研究发现游移绕圈气泡的运动轨迹呈现出不稳定、不规则、不光滑的特点.阵列气泡源于游移气泡,而游移气泡变成阵列气泡的方式主要是通过合并增大体积,从而减小所受的Bjerknes力,降低活性的方式实现的.游移气泡源于ALF(acoustic lichtenberg figure)空化云中大量空泡的合并,使以径向振动为主的空泡逐渐过渡到以表面波动为主的气泡.阵列气泡在Bjerknes力的作用下呈现出规则的表面波动,而体积更小受力更大的游移空泡的表面完全失稳,呈现极不规则的形貌,并对附近阵列气泡的表面波动产生影响.阵列气泡呈现出十分规则的排布,相邻阵列气泡之间的振动相位是相反的,表现为相互排斥.     

Direct contact ultrasound assisted freezing of chicken breast samples

Nowadays, rapid freezing is sought to favor the formation of small ice crystals. Several studies have shown that the application of ultrasounds (US) accelerates the processes of energy and mass transfer when they are applied through immersion systems. However, there are hardly any studies on its application in direct systems without the use of a liquid medium for its transmission. Therefore, the objective of this work was to evaluate the potential of the application of US for improving the freezing process of chicken breast samples. First, the application of intermittent US treatments at different net sonication times of 7, 17, 37, 50 and 67% during the freezing of distilled water samples in a conventional freezer was evaluated. It was observed that net sonication times of 37, 50 and 67% reduced the phase change period by 30.0, 21.4, 27.0%, respectively. The effective freezing time was also reduced by 12.4 and 12.8% by applying net sonication times of 37 and 50%. Considering these results, an intermittent US treatment with a net sonication time of 37% was chosen for chicken breast freezing in an air-forced cooling tunnel at ambient temperatures from −13 to −22 °C. The length of all the freezing phases was reduced upon application of US, leading to an overall process time reduction of approx. 11%. On the other hand, no significant differences were found either in the Water Holding Capacity (WHC) or Cooking Loss (CL) values between control and US assisted frozen chicken breast samples. Furthermore, in vitro experiments showed that US-assisted freezing did not influence protein digestibility of chicken meat samples.This study demonstrates the potential of the application of US by direct contact to favor energy transfer processes during freezing of water and chicken breasts samples. However, its effect on the quality of the frozen products should be further studied.     

Impact of the spatial coherence on self-interference digital holography

Owing to the unique feature that the signal and reference waves of self-interference digital holography (SIDH) contain the same spatial information from the same point of object, compared with conventional digital holography, the SIDH has the special spatial coherence properties. We present a statistical optics approach to analyzing the formation of cross-correlation image in SIDH. Our study reveals that the spatial coherence of illumination light can greatly influence the imaging characteristics of SIDH, and the impact extent of the spatial coherence depends substantially on the recording distance of hologram. The theoretical conclusions are supported well by numerical simulation and optical experiments.     

Recent advances and challenges in the recovery and purification of cellular exosomes

Exosomes are nanovesicles secreted by most cellular types that carry important biochemical compounds throughout the body with different purposes, playing a preponderant role in cellular communication. Because of their structure, physicochemical properties and stability, recent studies are focusing in their use as nanocarriers for different therapeutic compounds for the treatment of different diseases ranging from cancer to Parkinson's disease. However, current bioseparation protocols and methodologies are selected based on the final exosome application or intended use and present both advantages and disadvantages when compared among them. In this context, this review aims to present the most important technologies available for exosome isolation while discussing their advantages and disadvantages and the possibilities of being combined with other strategies. This is critical since the development of novel exosome‐based therapeutic strategies will be constrained to the effectiveness and yield of the selected downstream purification methodologies for which a thorough understanding of the available technological resources is needed.     

Impact of post-injection strategy on the physicochemical properties and reactivity of diesel in-cylinder soot

Post injection has significant benefit in the reduction of diesel soot emissions. Therefore, there is a need to understand the effect of post-injection strategy on soot physicochemical properties and reactivity because they play an important role in soot oxidation process that governs the final soot emissions. This work focuses on the impact of post injection on the physicochemical properties and reactivity of diesel in-cylinder soot using a main plus post injection (M*P) and a single injection (M) strategy. The soot was sampled by a developed total cylinder sampling system, and the dividing points of soot formation-dominant and oxidation-dominant phases were used for studying the impacts of post injection on the characteristics of in-cylinder soot. The physicochemical properties of the soot samples, including primary particle size, nanostructure, carbon chemical state and surface functional groups, were characterized. The soot reactivity was evaluated in terms of peak temperature, burnout temperature and apparent activation energy. In the oxidation-dominant phase, the M*P soot initially possesses smaller primary particle size, shorter fringe length, larger tortuosity, lower sp²/sp³ hybridization ratio of carbon atoms and higher content of aliphatic CH groups than the M soot. The beneficial influence of physicochemical properties on soot reactivity when using post injection is validated by the thermogravimetric data, which shows that the M*P soot is more reactive than the M soot at the onset of the oxidation-dominant phase. In the M*P case, the soot generated from the main-injection combustion has lower reactivity than the soot from the post-injection combustion after they experience the soot formation-dominant phase. The results indicate that the use of post injection leads to in-cylinder soot with physicochemical properties that favor reactivity. The enhancement of reactivity means that the soot will be more readily oxidized in the subsequent combustion process, and consequently contributes to a reduction in final soot emissions.     

云制造平台加工能力分享调度优化研究

云制造平台加工能力分享的调度优化是云制造模式的核心运营问题。为提高云制造平台对参与能力分享企业资源的利用率,解决实际云制造需求环境下企业级制造资源调度问题,达到云制造平台动态实时的要求,以最小化工期和成本为目标函数,构建了基于平台并面向分享的云加工能力调度模型。为快速求解多个云任务订单的最优调度序列,引入任务简易编码和随机权重,设计了改进的二阶粒子群算法,并提出可分享加工能力时间窗的更新策略。最后,通过算例验证云制造平台加工能力调度机制的可行性和有效性。     

Oligomeric phthalonitriles and tetrakis(phenylethynyl)benzene blends with improved processing and thermal properties

Blended resins were prepared from the resorcinol-based PEEK-like oligomeric phthalonitrile resin (RES) and tetrakis(phenylethynyl)benzene (TPEB), a high char yield arylacetylene resin. Initial probing of curing properties using differential scanning calorimetry, indicated that TPEB and RES co-cure when heated. Characterization of thermal properties using thermogravimetric analysis indicated that a 1:1 TPEB-RES blend (by weight) exhibited a char yield of 80% which was 6% larger compared to pure RES (74%). According to FTIR characterization, the enhanced thermal properties of TPEB-RES were the result of increased crosslinking density. Rheological studies of TPEB, RES, and TPEB-RES blends indicated that blended systems exhibit similar processing characteristics as RES resin. For example, resins display ideal viscosities and relatively large processing windows when cured at 175 °C. Alternatively, pure TPEB resin exhibits low viscosities when melted, which are not suitable for preparing composite materials. This study indicates that preparing TPEB-RES blends is an effect strategy for improving thermal performance of potential RES composites while still maintaining the required processability for fabrication of dense polymer composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2630–2640     

Processing polyamides with superheated water

Superheated water (shH₂O) is investigated as a process aid in conventional aliphatic polyamide (PA) systems. The polymers investigated include PA 6 (PA6), PA 6,6 (PA66), PA 6,12 (PA612), and PA 12 (PA12). It is shown that the PA melting and crystallization temperatures are significantly reduced when exposed to shH₂O. For example, the melting temperature of PA6 is depressed from 206 to 153 °C in the presence of shH₂O. A relationship between amide group density and thermal transition temperature reduction is observed. Processing these materials in shH₂O has led to a variety of materials ranging from low‐density foams to higher density locally anisotropic foamed morphologies. In situ observations of PAs melting in the presence of shH₂O are performed using a specially designed reactor. Results from these experiments are used to estimate the diffusion coefficient of shH₂O in PA6. Finally, low‐temperature extrusion is performed with PA6 and shH₂O at temperatures as low as 180 °C and mixture viscosity is estimated. A 20‐fold depression in the melt viscosity of PA6 is observed at 240 °C with shH₂O. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 803–813